Intermec PF2 4i User Manual

Appendix B — Default Settings
138 PM4i Mid-Range Printer User’s Manual
DHCP response Broadcast
MAC address N/A
Network type Ethernet (if no 802.11 radio is installed)
Wireless 802.11 (if an 802.11 radio is installed)
RFID Parameters
Parameter Default Value
Mode Enable
Tagread N/A
Tagadjust +0%
Retries 1
Voidtext N/A
Fieldstrength 100
Test/Service Parameters
Parameter Default Value
Testprint
Config
Test labels
Format
Page
UDC
Font
N/A
Data dump No
Memory reset All
LSS test N/A
Cmd language N/A
Network Parameters (continued)
Parameter Default Value

Intermec PF2 4i Specifications

General

Brand	Intermec
Model	PF2 4i
Category	Printer
Language	English