UDM108-01 15 RSA2024-TB/2”
Set-Up Procedure
Tape Loading
The HSD
®
2000-ET II /2’’Tape Heads accommodate 2" wide Tape rolls and HSD
®
2000-ET II
/3’’Tape Heads accommodate 3" wide rolls. Check the Tape Head Manual included with your
Carton Sealer or the Tape Head label on the side of the HSD
®
2000 ET II Tape Head to
determine which Tape Head you are using. Push the roll of tape onto the Mandrel with the
adhesive side up (refer to Threading Diagram on the HSD
®
2000 ET II tape head) until the
core seats against the Mandrel flange. This ensures the tape will be centered when feeding into
the tape head.
To Next Page
