UDM108-01 6 RSA2024-TB/2”
Important Safeguards
NOTE: IN THE EVENT THESE SAFETY LABELS SHOWN ON PAGES 6-8 ARE
DAMAGED OR DESTROYED, REPLACEMENTS ARE AVAILABLE.
There are a number of safety labels used on Interpack Carton Sealers.
The illustrated label “WARNING SHARP
CUTTING BLADE”, shown in Figure 2 is
attached to the Knife Guard inside the upper
and lower HSD
®
2000 Tape Head. The label
warns operators and service personnel of the
very sharp knife used to cut the tape at the
end of the tape application.
The HSD
®
2000 Tape Heads are equipped with
a Knife guard that covers the blade. The Tape Heads
should never be operated with the blade guards removed.
Turn air and electrical supplies off before servicing the tape heads. Figure 2
The “DANGER HAZARDOUS VOLTAGE” label
shown in Figure 3 is attached to the control box. The
label warns the service personnel to unplug the power
supply before attempting any service work on the carton
sealer.
Figure 3
To Next Page
