40
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 UPM1837 BOTTOM BELT DRIVE SECTION R.H. 1
2 UPM0029 STRIP UHMW 2" X .03"THK 1
3 UPM1688 REAR SUPPORT ANGLE R.H 2
4 UPM1519 COSTUM WASHER 2
5 UF2080 POP RIVET S-44 2
6 UPM0259 IDLER PULLEY 1
7 UPM1233EV IDLER PULLEY SHAFT 50mm 1
8 UPM4450 DRIVE PULLEY 1
9 UPM1816 BELT DRIVE. SAG 12E, 2" X 79.5" BFF 1
10 UPM0324 BEARING, PULLEY 2
11 UPM0109 IDLER PULLEY SPACER 1
12 UF2220 EXT RET'G RING 3/4" SHAFT 1
13 UPM0101EV TENSIONNER SPRING HOLDER 1
14 UPM4473 TENSIONNER SLIDE UA 1
15 UPM0112 SPRING LOCATOR PIN 1
16 UPM0038 DIE SPRING - LHL-750B-5 1
17 UF3683 SSS M6 X 10mm 2
18 UF6370 M8 - 1.25 x 25 FHCS 2
19 UF3680 FW M10 11
20 UF6371 LW M10 8
21 UF0457 HHCS M10-1.25 x 20 mm 8
22 UF1411 SSS M6 X 6mm 1
23 UF1400 SSS HK 3/8-16 X 3 1
24 UF1540 HNR 3/8-16 3
25 UF6397 FHCS M10-1.5 x 20 1
26 UF1192 FHCS M6-1 x 16 mm 2
27 UF0830 SHCS M6-1 x 16 mm 1
28 UF4252 BHCS M10 -1.5x20mm 1
29 UF6314 HNR M10 x 1.5 4
UAM0401
To Next Page
