UM094TW / UM594TW UDM094-04
10
Important Safeguards
There Are A Number Of Safety Labels Used On Intertape Carton Sealers.
The illustrated label as shown is attached
to the Knife Guard inside the upper and
lower HSD2000 ET II Tape Head. The
label warns operators and service
personnel of the very sharp knife used to
cut the tape at the end of the tape
application.
The HSD2000 ET II Tape Heads are
equipped with a Knife guard that covers
the blade. The Tape Heads should never
be operated with the blade guards
removed.
Turn air and electrical supplies off before
servicing the tape heads.
The label shown is affixed to the upper
tape head assembly on either side of the
machine. It warns operators and service
personnel of the presence of the cutting
blade that may not be visible. Caution
should be exercised when approaching
this area
The label shown alerts the operator of a
potential pinch point when a case
processes through the machine. Caution
should be exercised when approaching
this area
To Next Page
Loading...