Interpack USA 2024-SB - Section 7 Set-Up Procedures

To Next Page

To Previous Page

UM094TW / UM594TW UDM094-04

SET-UP PROCEDURES

1. Receiving and Handling

The machine is shipped to the customer fixed to a pallet. The machine is enclosed with either a

corrugated sleeve and cap or an HSC corrugated box. The sequence below is step by step

instructions to remove all packing materials.

 Remove the strapping securing the corrugated sleeve and cap or HSC corrugated box to

the pallet.

 Lift off the cap and corrugated sleeve or HSC corrugated box.

 Remove protective wrapping from machine.

 Remove or relocate all securing devices such as tie wraps or locking collars.

 Remove the mounting bolts, which secure the machine to the shipping pallet.

 Remove machine from the pallet and re-locate to an area to prepare for final installation.

Figure-6

All contents must be verified upon reception. The following items are included with each

machine.

 USA 2024-SB

 Operators Manual Machine

 Operators Manual Tape Head

 Plastic bag containing tape head spare parts.

Note: After Unpacking The Case Sealer, Look For Any Damage That May Have Occurred

During Shipping. Should The Case Sealer Be Damaged, File A Claim With The

Transport Company And Notify Your Authorized Intertape Distributor.