UM094TW / UM594TW UDM094-04
47
P
REVENTIVE
M
AINTENANCE
Cleaning The Machine
Figure-36
Warning! Please Exercise All Safety Precautions Prior To Starting This
Procedure. Disconnect Electrical Power And Wear Approved
Safety Glasses
a. Side Belt Drive Base
i. Insert An Air Nozzle Along The Top Edge Of The Belt Into The Opening
Of The Drive Base And Clean Out Any Dust And Dirt
b. Column Shaft
i. With A Cloth, Wipe Down Any Accumulation Of Dust And Dirt.
ii. Be Sure To Wipe Down Both Columns.
c. Connecting Chain For Centering Assembly
i. Blow Off Any Accumulation Of Dust And Dirt From The Connecting
Chain
Side Belt Drive Base
Column Shaft
Connecting Chain
To Next Page
Loading...