UM094TW / UM594TW UDM094-04
14
Important Safeguards
Warning
To Reduce The Risk Associated With Mechanical And Electrical Hazards:
a. Allow Only Properly Trained And Qualified Personnel To Operate And Service
This Equipment.
Operator Skill Level Descriptions
Skill “A”: Machine Operator
This Operator Is Trained To Use The Machine With The Machine Controls, To Feed
Cases Into The Machine, Make Adjustment For Different Case Sizes, To Change The
Tape And To Start, Stop, And To Re-Start Production
Important: The Area Supervisor Must Ensure That The Operator
Has Been Properly Trained On All Machine Functions
Before Operating The Machine.
Skill “B” Mechanical Maintenance Technician
This Technician Is Trained To Use The Machine As The Machine Operator And In
Addition Is Able To Work With The Safety Protection Disconnected, To Check And
Adjust Mechanical Components, To Perform Maintenance Operations And Repair The
Machine. He Is Not Allowed To Work On Live Electrical Components
Skill “C” Electrical Maintenance Technician
This Technician Is Trained To Use The Machine As The Machine Operator And In
Addition Is Able To Work With The Safety Protection Disconnected, To Check And
Adjust Mechanical Components, To Perform Maintenance Operations And Repair The
Machine. He Is Allowed To Work On Live Electrical Panels, Terminal Blocks And
Control Equipment.
Skill “D” Manufacturers Technician
Skilled Technician Sent By The Manufacturer Or Its Agent To Perform Complex Repairs
Or Modifications, When Agreed With The Customer
To Next Page
Loading...