UM094TW / UM594TW UDM094-04
43
TROUBLESHOOTING CONTINUED
Trouble Possible Causes Solutions
Rear Tape Leg Is
Folded Or Wrinkled
Tape Threaded Incorrectly
Adhesive Build Up In Tape Path
Dull Blade
Excessive Unwind Tension From
Tape Roll
Review Tape Threading Page 33
Clean Tape Guide Rollers To
Provide A Free Rotation
Clean Tape Path, Blade
Replace Blade
Adjust Mandrel Tension And
Clutch Roller Tension. See Tape
Head Manual Provided With
Tape Head
Tape Does Not Cut Dull Blade
Insufficient Tension At The Clutch
Roller
Replace Blade
Increase Clutch Roller Tension
Slightly. See Tape Head Manual
Provided With Tape Head
Upper Head Adjustment
Difficult To Move
Dust And Dirt On Shaft
Upper Head Misaligned.
Clean Shaft, Lubricate With
Industrial Grade Silicone.
Drive Base Adjustment
Handle Is Hard To Turn
Dust And Dirt On Acme Screw
Dust And Dirt On Chain
Clean Acme Screws, Lubricate
With Light Machine Grease. See
Section 11 pages 47-48
Clean Chain And Lubricate With
Chain Lube. See Section 11
pages 47-48
To Next Page
Loading...