Machines manufactured by Hydralok, Bristol, UK
Machine enquiries, sales, after sales service :
Interpump Hydraulics (UK) Ltd t/a IMM Hydraulics (UK) : Kidderminster
Tel : (0)121 550 1115 / sales@immhydraulics.co.uk
BASIC SWAGING PROCEDURE
Basic Swage Screen:
Press to begin a basic swage.
Touch to input target swage size.
The forward (right) arrow will always
progress to the next sequential screen.
This field will display the die
set required to swage the specified swage size.
These dies may be fitted manually, or the
button can be pressed to use the quick change tool,
if quick change system is present and activated.
Press after correct dies have been fitted.
Follow onscreen instructions to complete swage.
Displays the current diameter in
real time to indicate when the final swage size
reached.
Press to activate the rear view camera to view
the reverse of the head while swaging.
To Next Page
Loading...