Machines manufactured by Hydralok, Bristol, UK
Machine enquiries, sales, after sales service :
Interpump Hydraulics (UK) Ltd t/a IMM Hydraulics (UK) : Kidderminster
Tel : (0)121 550 1115 / sales@immhydraulics.co.uk
Settings Page 2
Press to return to settings page one.
Calibration
Master Offset
Machine Upgrade
Machine Clock
Calibration
Press for machine calibration.
Press to edit calibration mandrel sizing.
Machine Calibration
Follow the onscreen instructions to calibrate the
machine.
Fit 46 dies for calibration using a standard mandrel.
Press each text box to determine the mandrel end
sizes. The largest size must be input on the left.
To Next Page
Loading...