Selecting the Pump Speed
This sub-menu allows you to select your Circulator’s pump speed. The choices are Low (LO) and
High (HI); the factory default is High (HI).
To Access: Press the
key until PUMP appears on the display.
To Change: To select the low pump speed, touch the top arrow; to select the high pump
speed, touch the bottom arrow.
To Accept: Press
,
, ,
or allow the LCD to return to the main operational
display (approximately 10 seconds).
Touch top arrow to select
High
Touch bottom arrow to select
Low
110-512 PSC/EN
24
To Next Page
Loading...