To Next PageTo Next PageWhat to do if the water in my Intex 128454GN Swimming Pool is not clean?
If the water in your Intex Swimming Pool isn't clean, make sure the cartridge assembly is properly attached. Increase the filtration time. Clean or replace the filter cartridge. Keep the spa water properly sanitized according to the chemical manufacturer’s instructions. Regularly check and clean the filtration inlet and outlet.
Why is my Intex 128454GN Swimming Pool leaking between the spa tub connectors and control unit connectors?
If there's leaking between the spa tub connectors and control unit connectors of your Intex Swimming Pool, tighten the inlet and outlet connections. Also, check the spa control base inlet/outlet o-ring. If it's missing or dirty, coat the o-ring with petroleum jelly for a waterproof seal. Remove the grid from inside the spa with a screwdriver, ensure the inlet/outlet O-ring is in place, clean and not damaged.
What to do if the Intex 128454GN Swimming Pool has no display or the spa control unit does not work?
If the Intex Swimming Pool's display isn't working or the spa control unit is unresponsive, first, ensure the spa is properly plugged in and switched on. Then, check that the control panel cable plug is firmly attached to the control base receptacle. Also, verify the power source and reset the RCD if it has tripped. If the RCD is broken, further assistance is needed.
Why does my Intex Swimming Pool keep tripping the household circuit breaker?
If the household circuit breaker trips when using your Intex Swimming Pool, ensure the circuit breaker has the correct rating. If it is overloaded, provide a dedicated circuit breaker feeding the spa electrical outlet only. If there's an electrical fault in the line, professional help is needed.
How to fix an Intex Swimming Pool that is not heating properly?
If your Intex Swimming Pool isn't heating properly, first, increase the set temperature and ensure the spa cover is attached. Make sure the filter cartridge is clean; replace it if necessary. If the heater is in STANDBY mode, press the flame button twice to heat the water to the set temperature. If the heating element has failed, further assistance is needed.
What to do if the filtration pump is not working on my Intex 128454GN Swimming Pool?
If the filtration pump on your Intex Swimming Pool isn't working, clean or replace the filter cartridge in time. Also, check and clean the filtration inlet and outlet regularly. If the filter pump motor has failed, further assistance is needed.
What to do if the jet function does not work on my Intex 128454GN?
If the Intex Swimming Pool jet function isn't working, turn off and unplug the spa. Let it cool down completely before restarting.
Why are the jets weak in my Intex 128454GN?
If the jets output on your Intex Swimming Pool are weak, ensure the water level is between the MIN and MAX levels. Check for any obstructions in the suction inlet inside the tub and ensure it's not covered or blocked. Clean any dirt inside the jet nozzles. If the jet nozzles plumbing pipes are damaged, further assistance is needed.
How to fix an Intex Swimming Pool jet air control knob that is not working?
If the jet air control knob on your Intex Swimming Pool isn't working, clean any dirt inside the jet nozzles. If the jet airflow plumbing inside the spa tub is damaged, further assistance is needed.
Why does my Intex Hot Tub keep tripping the household circuit breaker?
Your Intex Hot Tub might be tripping the circuit breaker because the circuit breaker is under-rated. Ensure the circuit breaker has the correct rating. It could also be due to an overloaded circuit breaker, so provide a dedicated circuit breaker feeding the spa electrical outlet only. If there's an electrical fault in the line, contact a qualified electrician to correct it.
General| Brand | Intex |
|---|---|
| Model | 128454GN |
| Type | Frame Pool |
| Shape | Rectangular |
| Material | PVC |
| Included Accessories | Filter pump |
