Intex 128454GN - User Manual

Other manuals for Intex 128454GN

Questions and Answers:

J
Joseph DominguezAug 28, 2025
What to do if the Intex 128454GN Swimming Pool has no display or the spa control unit does not work?
- L
  lauramyersAug 28, 2025
  If the Intex Swimming Pool's display isn't working or the spa control unit is unresponsive, first, ensure the spa is properly plugged in and switched on. Then, check that the control panel cable plug is firmly attached to the control base receptacle. Also, verify the power source and reset the RCD if it has tripped. If the RCD is broken, further assistance is needed.
K
Katelyn FieldsSep 22, 2025
What does error code E96 mean on my Intex Swimming Pool?
- A
  Amy GilesSep 22, 2025
  If your Intex Swimming Pool displays error code E96, it indicates a system error. Turn off and unplug the control unit, then plug the RCD and restart.
J
Jacob HebertAug 29, 2025
How to fix an Intex Swimming Pool that is not heating properly?
- K
  Kristy PruittAug 29, 2025
  If your Intex Swimming Pool isn't heating properly, first, increase the set temperature and ensure the spa cover is attached. Make sure the filter cartridge is clean; replace it if necessary. If the heater is in STANDBY mode, press the flame button twice to heat the water to the set temperature. If the heating element has failed, further assistance is needed.
A
Amy JohnsonAug 29, 2025
What to do if the filtration pump is not working on my Intex 128454GN Swimming Pool?
- M
  Michelle SaundersAug 29, 2025
  If the filtration pump on your Intex Swimming Pool isn't working, clean or replace the filter cartridge in time. Also, check and clean the filtration inlet and outlet regularly. If the filter pump motor has failed, further assistance is needed.
C
Cheryl DavisAug 30, 2025
What to do if the jet function does not work on my Intex 128454GN?
- V
  Veronica Hale DDSAug 30, 2025
  If the Intex Swimming Pool jet function isn't working, turn off and unplug the spa. Let it cool down completely before restarting.
D
Daniel BrownSep 23, 2025
What to do if the pump connectors are not level with the spa connectors on my Intex 128454GN Swimming Pool?
- K
  Kristin JordanSep 23, 2025
  If the pump connectors are not level with the spa connectors on your Intex Swimming Pool, elevate the pump with wood or another type of insulated material to bring the pump’s connectors level with the spa’s connectors. This is because PVC can change shape, which is normal.
L
Laura CrawfordSep 17, 2025
Why does my Intex Hot Tub tub lose air pressure?
- M
  Matthew HooperSep 18, 2025
  If your Intex Hot Tub is losing air pressure, first, ensure the air valve cap is securely closed. If that's not the issue, fill up the spa tub with air and make sure the air valve base is tightened. If there's a hole, cut, or split on the spa tub, apply liquid soap and water to find the leak, then clean and dry the area before applying the repair patch that comes with your spa.
D
Dr. Brooke WillisSep 13, 2025
Why is my Intex Hot Tub so noisy in filtration mode?
- S
  Samantha RiggsSep 13, 2025
  If your Intex Hot Tub is too noisy during filtration, make sure the control panel, back cover, and all inlet/outlets are securely connected. Ensure the ground is level, firm, and smooth. If the spa filter motor has failed, replace it with a new one.
J
Joshua WagnerSep 1, 2025
What to do if the bubble air blower does not work on my Intex 128454GN?
- J
  Jose ClarkSep 1, 2025
  If the bubble air blower on your Intex Swimming Pool isn't working, turn off and unplug the spa. Let it cool down before restarting.
R
Rodney GonzalezSep 1, 2025
How to level pump connectors with spa connectors on Intex 128454GN?
- C
  Christina SmithSep 1, 2025
  If the pump connectors are not level with the spa connectors on your Intex Swimming Pool, elevate the pump with wood or another type of insulated material to bring the pump’s connectors level with the spa’s connectors.