Name: Intex Krystal Clear 633T
Brand: Intex
Rating: 4 (1 reviews)

Questions and Answers:

V
vmartinJul 30, 2025
Why won't my Intex Krystal Clear 633T Swimming Pool Pump motor start?
- V
  Vanessa MooreJul 30, 2025
  The Intex Swimming Pool Pump motor may fail to start due to several reasons: it might not be plugged into a 3-wire outlet protected by a Class A Ground Fault Circuit Interrupter; the circuit breaker may need resetting (and if it repeatedly trips, an electrician should check your electrical system); the GFCI circuit breaker may have tripped and need resetting; or the motor may be too hot, requiring cool-down time.
D
daniellongAug 3, 2025
What to do if my Intex Krystal Clear 633T Swimming Pool Pump doesn’t work?
- L
  Laura McneilAug 3, 2025
  If your Intex Swimming Pool Pump isn’t working, check if the water level is low (fill to correct level), the strainer screen is plugged (clean the screens), there's an air leak on the intake hose (tighten hose nuts, check for damage), the motor is faulty or impeller jammed (clear any sticks or leaves in the intake hose), or there's an air lock inside the cartridge chamber (turn and pull valve handle to full upright position).
M
michael43Aug 7, 2025
Why is the water flow very slow in my Intex Krystal Clear 633T?
- B
  brownmorganAug 8, 2025
  Slow water flow in your Intex Swimming Pool Pump can occur if the inlet or discharge is clogged (clear obstructions in the intake hose), there's an air leak on the intake line (tighten hose nuts, check hoses, and water level), scale or buildup is on the cartridge (clean it more often), the pool is excessively dirty (operate the filter longer), the filter cartridge is dirty (clean it more often), or the nozzle and strainer connection are reversed (install the nozzle at the upper position of pool inlet, and the strainer at the lower position of pool outlet).