Intex Krystal Clear SX2800 User Manual

342
GS
SAVE THESE INSTRUCTIONS
(342GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2022
English
Page 2
Warnings
..........................................................................
3
Parts References
.............................................................
4-8
Setup Instructions
.........................................................
9-16
Product Specifications
...................................................
11
Operating Instructions
...................................................
17-19
Intex Pools Operating Time Table
..................................
20
Non-Intex Pools Operating Time Table
..........................
21
Maintenance
....................................................................
22
Long Term Storage
..........................................................
23
Troubleshooting Guide
...................................................
24
Common Pool Problems
.................................................
25
General Aquatic Safety
...................................................
25
Limited Warranty
.............................................................
26
TABLE OF CONTENTS
RCD OPERATING INSTRUCTIONS
• Plug RCD into power outlet. Press RESET button on the RCD plug.
Indicator should be "ON".
• Press TEST button on the RCD plug. Indicator should be "OFF".
• Press RESET button for use. Do not use if test fails. Contact a qualified
electrician to determine cause of failure.
RESET
RESET
TEST
TEST
RESET
RESET
RESET
TEST
TEST
TEST

Intex Krystal Clear SX2800 Specifications

General

Model	Krystal Clear SX2800
Type	Sand Filter Pump
Voltage	110-120V
Hose Diameter	1.5 inches
Pump Flow Rate	2800 GPH
Timer	24-hour automatic timer
Valve	6-way control valve
Plug Type	3-prong