Intex PureSpa SSP-10 - Storage

192
PO
S AVE THESE INSTRUCTIONS
(192PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 04/18/2013
English
Page 15
MAINTENANCE (continued)
1. Drainandcleanthespafollowingthe“SpaTubDrainage”and“SpaTubCleaning”sections.
2. Reversesetupinstructionstodeateanddisassemblethespatub,spacontrolunitandspacoverair
bladder.
3. Makesureallthespacomponentsandaccessoriesarethoroughlycleananddrybeforestorage.Air-drythe
spa tub in the sun for an hour before folding.
4. Foldthespatublooselyandavoidanysharpcornerstopreventdamageorleakagetothespatubliner.
5. Prepareadditionalnewcartridgesfornexttimeuse.
6. Storethespatubandaccessoriesinadry,temperaturecontrolled,between32º–104ºF(0º–40ºC),
storage location.
7. Theoriginalpackingcanbeusedforstorage.
STORAGE
Spa Tub and Cover Air Bladder Repair
Usetheenclosedrepairpatchtorepairanypuncture:
• Cleananddrytheareatoberepairedthoroughly.
• Removethepatchbackingpaperandpresspatchrmlyoverthepuncture.
 Smoothoutthesurfacetoremoveanyairbubblesunderthepatch.