(260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/15/2015
260
PO
SAVE THESE INSTRUCTIONS
English
Page 22
MAINTENANCE (continued)
3. Disconnect the 2 hoses from the Saltwater System, and attach the cell covers (9) to the inlet
and outlet of the electrolytic cell (3).
4. Unscrew the collar of the flow sensor (6) and pull out the flow sensor from the electrolytic cell
(3) housing.
5. Pour kitchen grade vinegar into the electrolytic cell (3) to immerse the titanium and ECO
electrodes. Soak for 1 hour.
6. Open one side of the cell cover (9), drain and properly dispose of the vinegar. Connect the
hose which goes from the pool to the cell. Flush the electrolytic cell housing with the pool
water.
7. Reverse steps 3, 4, 5 and 6 to reconnect the electrolytic cell.
To Next Page
Loading...
Need help?
General
