Intex SF60110-1 - User Manual

195
PO
(195PO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/29/2016
English
Model SF80110-1
Model SF70110-1
Model SF60110-1
Don’t forget to try these other fine Intex products: pools, pool
accessories, inflatable pools and in-home toys, airbeds and boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex
reserves the right to change specifications and appearance, which
may result in updates to the instruction manual without notice.
OWNER’S MANUAL
For illustrative purposes only.
IMPORTANT!
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance, visit
www.intexcorp.com
For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):
1-800-234-6839
Monday through Friday, 8:30am to 5:00pm Pacific Time
195-*PO-R0-1706
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.

Intex SF60110-1 Specifications

General

Brand	Intex
Model	SF60110-1
Category	Swimming Pool Pump
Language	English

Summary

Important Safety Rules

General Safety Precautions

Read and follow all instructions carefully before installing and using this product to prevent injury or death.

Pool Safety and Usage Cautions

Product Specifications

Setup Instructions

Pool Outlet Valve Assembly

Pool Inlet Valve Assembly

Motor Pre-filter Assembly Connection

Sand Tank and Base Mounting

Filter Sand Loading Procedure

Guidance on properly filling the filter tank with sand and distributing it evenly.

6-Way Valve Connection

Detailed steps for installing the 6-way valve onto the sand filter tank.

Sand Filter Pump Hose Connection Setup

Standard Hose Connections

Operating Instructions

Operating Safety Warnings

Essential safety warnings and precautions before operating the sand filter pump.

6-Way Valve Operation Modes

Explanation of each valve position and its corresponding water flow direction.

System Initial Startup and Backwash

Steps for priming the pump and performing the initial backwash procedure.

Pump Timer and Manual Operation

Instructions for operating the pump using the timer or manual mode.

Motor Pre-filter Cleaning and Maintenance

Long Term Storage & Winterization

Troubleshooting Guide

Troubleshooting Pump Malfunctions

Table addressing common problems like motor failure, slow flow, and leaks with solutions.

General Aquatic Safety

Limited Warranty Information