EasyManua.ls Logo

Intex SF60220RC - User Manual

Intex SF60220RC
23 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
195
GS
(195GS) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/30/2014
English
Model SF80220RC 6 m
3
Model SF70220RC 8 m
3
Model SF60220RC 10 m
3
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.
Don’t forget to try these other fine Intex products: pools, pool
accessories, inflatable pools and in-home toys, airbeds and boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves
the right to change specifications and appearance, which may
result in updates to the instruction manual without notice.
©2014 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.
- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle
Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous
licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen
Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O
Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European
Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union
durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com
For illustrative purposes only.
OWNER’S MANUAL
195-*GS-R0-1507

Table of Contents

Questions and Answers

  • J
    Jessica RodriguezAug 14, 2025
    Why Intex Swimming Pool Pump filter motor fails to start?
    • J
      Janet SmithAug 14, 2025
      The Intex swimming pool pump filter motor may fail to start due to several reasons: * The motor might not be plugged in. Ensure the line cord is plugged into a 3-wire outlet protected by a Class A Ground Fault Circuit Interrupter, or RCD. * The GFCI/RCD circuit breaker may have tripped. Try resetting the circuit breaker. If it trips repeatedly, there might be a defect in your electrical system; turn off the circuit breaker and consult an electrician. * The motor might be too hot, causing the overload protection to shut off. Allow the motor to cool down before restarting.
  • J
    Jason HallAug 17, 2025
    What to do if Intex SF60220RC doesn’t work?
    • T
      Travis WallaceAug 17, 2025
      If your Intex swimming pool pump isn’t working, check the following: * Low water level: Fill the pool to the correct water level. * Strainer screen clogged up: Clean the strainer screens at the pool inlet. * An air leak on the intake hose: Tighten hose nuts and check the hose for damage.
  • C
    christophervargasAug 25, 2025
    Why is the pressure gauge not working on my Intex Swimming Pool Pump?
    • C
      Chad MartinAug 25, 2025
      The pressure gauge on your Intex swimming pool pump might not work due to: * A clogged inlet of the pressure gauge. Clear any obstructions in the intake by unscrewing it from the 6-way valve.
  • E
    Eric DeleonAug 27, 2025
    How to troubleshoot inaccurate timer or timer that can't be set on Intex SF60220RC Swimming Pool Pump?
    • G
      Grace RamirezAug 27, 2025
      To troubleshoot an inaccurate or un-settable timer on your Intex swimming pool pump: * The inner timer might be defective. Turn off the pump and restart it 5 minutes later. * Reset the timer.
  • L
    lauren47Aug 30, 2025
    What to do if Intex Swimming Pool Pump doesn't clean pool?
    • M
      Michael StevensAug 30, 2025
      If your Intex swimming pool pump isn’t cleaning the pool effectively, consider the following: * Improper chlorine or pH levels: Adjust the chlorine and pH levels. Consult your local swimming pool supply store for guidance. * No filtering media in the tank: Load the tank with filter sand, following the “sand loading instructions.” * Wrong 6-way valve setting position: Set the valve to the “FILTER” position. * Excessively dirty pool: Operate the filter for longer periods. * The strainer screen is restricting the water flow: Clean the strainer screen at the inlet.
  • R
    Russell KingSep 3, 2025
    Why is sand flowing back into the pool from my Intex SF60220RC?
    • D
      davidonealSep 3, 2025
      Sand flowing back into the pool from your Intex swimming pool pump can be due to: * The sand being too small. Use only No. 20 silica sand with a particle size range of 0.45 to 0.85 mm (0.018 to 0.033 inches) and a Uniformity Coefficient less than 1.75. * The sand bed being calcified. In this case, you should change the sand.
  • J
    James ToddSep 6, 2025
    How to fix a leaking hose on Intex SF60220RC Swimming Pool Pump?
    • A
      andersonlisaSep 6, 2025
      If you have a leaking hose on your Intex swimming pool pump, here are some things to check: * Hose nut not securely tight: Tighten or reinstall the hose nut. * Hose connection fitting o-ring/L-shape o-ring missing: Ensure the o-ring/L-shape o-ring is in place and not damaged.
  • C
    Cheryl WilsonSep 9, 2025
    What causes 6-way valve/cover leaking in Intex SF60220RC Swimming Pool Pump?
    • R
      rachelgilbertSep 9, 2025
      A leaking 6-way valve or cover on your Intex swimming pool pump can be caused by: * A missing sand tank o-ring. Remove the 6-way valve cover and ensure the o-ring is in place. * A dirty sand tank o-ring. Clean the sand tank o-ring with garden hose water. * A flange clamp that is not tight. Tighten the clamp with the wrench supplied.
  • S
    Suzanne WilliamsNov 19, 2025
    What to do if Intex SF60220RC Swimming Pool Pump doesn’t pump water or flow is very slow?
    • P
      Pamela RosarioNov 19, 2025
      If your Intex swimming pool pump isn’t pumping water or the flow is very slow, here are some potential causes and solutions: * There might be a clog in the inlet or discharge. Clear any obstructions in the intake hose by discharging it inside the pool wall. * There could be an air leak on the intake line. Tighten hose nuts, inspect hoses for damage, and check the pool water level. * The pool may be excessively dirty. Clean the pre-filtering basket more often. * The sand media might be clogged with dirt. Backwash the filter. * The nozzle and strainer connections could be reversed. Install the nozzle at the upper position of the pool inlet and the strainer at the lower position of the pool outlet. * There might be crusting or caking on the filtering sand surface. Remove about 1”...

Summary

Important Safety Rules

Read and Follow All Instructions

Emphasizes the importance of carefully reading and following all instructions before use.

General Safety Warnings

Covers critical warnings regarding electric shock, children, and safe operation of the product.

Pool Outlet - Strainer & Plunger Valve Setup

Pool Inlet - Nozzle & Plunger Valve Setup

Setup Instructions

Sand Tank Installation

Sand Loading

Guidance on correctly filling the filter tank with sand, including media type and quantity.

6-Way Valve Installation

Steps for installing the 6-way valve, including hose connections and clamping securely.

Sand Filter Pump Hose Connection Setup

Operating Instructions

RCD Operating Instructions

Procedure for testing and using the Residual Current Device (RCD) plug for electrical safety.

6-Way Valve Positions and Function

Initial Startup and Operation

Backwash Procedure

Motor Pre-Filter Cleaning and Maintenance

Long Term Storage & Winterization

Troubleshooting Guide

General Aquatic Safety

Intex SF60220RC Specifications

General IconGeneral
BrandIntex
ModelSF60220RC
CategorySwimming Pool Pump
LanguageEnglish

Related product manuals