Invacare Get-U-Up - Adjusting the Knee Pad Height

OPERATING THE LIFT
Get-U-Up
™
Lift 16 Part No. 1148115
FIGURE 3.2 Raising Model Hydraulic Lifts
Adjusting the Knee Pad Height
 WARNING
Never adjust knee pad while patient is in the standing position.
Never try to adjust knee pad while the lift is moving.
Always make sure that the adjustment pins are engaged in the corresponding height
adjustment holes before using.
NOTE:Forthisprocedure,refertoFIGURE 3.3.
1. Pickaheightsettingthatwillbe
comfortabletothepatientandprovide
thenecessarysupport.
NOTE:Thekneepadshouldbepositionedso
thatthekneeportionofthelegcontactsthepad.
NOTE:Theupperadjustmentpinsare
typicallyusedforshorterindividuals.
The
loweradjustmentpinsaretypicallyusedfor
tallerindividuals.
2. Usingbothhands,pullboth
adjustmentpinsoutwardatthesame
timeandhold.
3. Positionthekneepadtothedesired
heightandreleaseadjustmentpinsinto
thecorrespondingalignmentholes.
4. Checktomakesurethatbothpinsare
engaged.
FIGURE 3.3 Adjusting the Knee Pad Height
Pump
Handle
Open
Control Valve
Closed
Pump Handle
Knee Pad
Adjustment Pin
Adjustment Pin
Note:Theupperadjustment
pinsaretypicallyusedfor
shorterindividuals.The
loweradjustmentpinsare
typicallyusedfortaller
individuals.
Download from Www.Somanuals.com. All Manuals Search And Download.