Invacare LYNX LX-3 - Procedure 6 - Backrest Adjustments; Folding and Unfolding the Backrest; Back Cushion;Upholstery Removal and Installation

Invacare Scooters 40 Part No. 1090132 Rev F
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure
that all attaching hardware is tightened securely - otherwise injury or
damage may result.
FOLDING/UNFOLDING THE
BACK (FIGURE 1)
1. To fold, push back down towards seat.
2. To unfold, pull back up into the upright
position.
REMOVING/INSTALLING
BACK CUSHION/UPHOLSTERY (FIGURE 2)
1. Unbutton the snap buttons on the back upholstery.
2. Remove and replace foam insert and/or upholstery.
3. Secure back upholstery to back with snap buttons.
NOTE: Clean upholstery with warm DAMP cloth and mild detergent to remove superficial soil.
WARNING
Laundering or moisture will reduce flame retardation of the upholstery.
Snap
Buttons
Back
FIGURE 2 - REMOVING/INSTALLING BACK CUSHION/UPHOLSTERY
Back Cushion
w/Foam Insert
FIGURE 1 - FOLDING/UNFOLDING
THE BACK
Back
Seat
This Procedure Includes the Following:
Folding/Unfolding the Back
Removing/Installing the Back Cushion/Upholstery
Adjusting the Back Recline
Adjusting the Headrest
BACKPROCEDURE 6
BACK
All manuals and user guides at all-guides.com