Why do the motors not run on my Invacare Pronto M41?
If your Invacare Wheelchair motors do not run, it could be due to several reasons. Check the cabling for bad connections. The batteries might be defective and need replacement. There could be defective cabling to the power module or remote, so inspect the cables. The power module itself might be defective, requiring replacement. Finally, check for corroded contacts on the cabling.
Why does the gearbox make a clicking noise on my Invacare Pronto M41 Wheelchair?
If the gearbox on your Invacare Wheelchair makes a clicking noise, it could be due to a defective gearbox, requiring motor replacement. Another possibility is a loose drive wheel, which should be tightened. Secure the bolts with thread locking adhesive if necessary.
Why does the motor judder or run irregularly on my Invacare Pronto M41 Wheelchair?
If your Invacare Wheelchair motor judders or runs irregularly, or only one motor runs, it could be due to a defective bearing or collector. In either case, measure the internal resistance of the motor and replace the motor if defective.
Why does the motor make a clicking noise on my Invacare Pronto M41?
If your Invacare Wheelchair motor makes a clicking noise, it could be due to a defective bearing or collector. In either case, measure the internal resistance of the motor and replace the motor if defective.
Why is there a scraping noise or blocked motor on my Invacare Wheelchair?
If you're experiencing a scraping noise or the motor is blocked on your Invacare Wheelchair, it could be due to a defective bearing or a defective gearbox. In either case, replace the motor.
General| Type | Power Wheelchair |
|---|---|
| Drive System | Rear-Wheel Drive |
| Weight Capacity | 300 lbs. |
| Battery | 12V 35AH |
| Overall Width | 24 inches (61 cm) |
| Motor | 24V DC |
Provides essential information about product handling and safety instructions.
Explains hazard symbols and signal words used in the manual.
Defines the purpose and target user group for this mobility device.
Details situations that could affect the device's usability and when to stop using it.
Covers critical warnings for safe operation and potential risks.
Highlights risks and precautions related to the device's electrical components.
Provides essential safety guidelines for driving and using freewheel mode.
Outlines safety precautions for maintaining the mobility device properly.
Discusses initial setup procedures and the importance of professional adjustment.
Details how to adjust the remote's position for optimal user comfort.
Explains adjustments for armrest height, width, and backrest for standard seats.
Covers adjustments for armrests and seat depth/width on Modulite seats.
Details adjustments specific to the Captain's seat, including armrests.
Instructions for adjusting the position and height of the Rea headrest.
Information on removing, installing, and adjusting the center-mounted footboard.
Procedures for removing and adjusting manually adjustable center-mounted legrests.
Guidance on swivelling, setting angle, and adjusting length of height-adjustable legrests.
Instructions for adjusting Vari-A legrests, including length and calf pad settings.
General guidance on operating the mobility device and factors affecting performance.
Safe procedures for entering and exiting the mobility device.
Steps to remove the armrest for easier side transfers.
Information on safely navigating obstacles with the mobility device.
Explains the SureStep technology for climbing obstacles.
Safety precautions for driving on inclines and declines.
Details on the device's overload protection and error code handling.
Overview of battery types, maintenance, and handling.
Provides initial charging advice for new batteries and break-in periods.
Step-by-step instructions and warnings for charging the device's batteries.
Guidelines for cleaning and disinfecting the mobility device safely.
Lists regular inspection checks to be performed by the user and their intervals.
Pre-use checks for safety and proper functioning.
Weekly inspection tasks for components like armrests and tires.
Monthly inspection tasks for upholstered parts, legrests, casters, and wheels.
Information on dealing with wheel damages and tire pressure checks.
Important warnings and guidelines for transporting the mobility device.
Safe methods for moving the device into a vehicle, considering user safety.
Conditions and warnings for using the device as a vehicle seat.
Details on securing the device in a vehicle using tie-down systems.
Guidelines for properly securing the user within the device when used as a seat.
Steps for disassembling the device for safe transportation.
Safety warnings and procedures for lifting and moving the device between floors.
Provides detailed technical specifications and operating conditions for the device.
A log for recording performed inspections and service history.
To Next Page
