Invacare Pronto M51 User Manual (English)

Other manuals for Invacare Pronto M51

Owner's Manual96 pages

Specifications4 pages

Operating And Maintenance Manual80 pages

Parts Catalog100 pages

Questions and Answers:

C
Charles VazquezSep 8, 2025
What to do if Invacare Pronto M51 batteries are not charging?
- D
  David TaylorSep 9, 2025
  If your Invacare Wheelchair batteries are not charging, the charger may not be working, or the battery connections may be loose. There might not be any current at the wall outlet, or there could be a bad connection on the charger, charger cable, plug, or internal wiring. Have the charger replaced, check and secure all connections, and switch to another wall outlet. If problems persist, the charger may need replacing or internal repairs. You may need to contact your dealer or Invacare.
M
Mallory EricksonAug 23, 2025
How to increase driving distance of Invacare Wheelchair?
- S
  ssawyerAug 23, 2025
  To maximize the driving distance of your Invacare Wheelchair: * Ensure batteries are charged for at least 8 hours, ideally overnight, and that the charger setting is correct. * If the batteries are weak and not holding a charge, consider replacing them.
T
tony50Aug 25, 2025
What to do if battery indicator flashes low charge on Invacare Pronto M51 after recharging?
- J
  Jason HurstAug 25, 2025
  If the battery indicator on your Invacare Wheelchair flashes a low charge level immediately after recharging, it could be due to weak batteries or a charger malfunction. Consider replacing the batteries or the charger. For electrical malfunctions, contact your dealer or Invacare.
T
Tina HaasAug 27, 2025
Why does the charger indicator show low charge on my Invacare Pronto M51 after charging?
- J
  Juan JacksonAug 27, 2025
  If the charger indicator shows a low charge level immediately after charging your Invacare Wheelchair, it might be due to weak batteries, an electrical malfunction, or a charger malfunction. You may need to replace the batteries or the charger. For electrical malfunctions, contact your dealer or Invacare.
T
tjohnsonAug 27, 2025
What does it mean if the power indicator is off on my Invacare Wheelchair, even when recharging?
- R
  Richard ChavezAug 27, 2025
  If the power indicator on your Invacare Wheelchair is off, even while recharging, it suggests an electrical malfunction. Contact your dealer or Invacare for service.
M
Marcus RiceAug 29, 2025
What to do if my Invacare Pronto M51 will not drive?
- J
  Jeremy LynnAug 29, 2025
  If your Invacare Wheelchair won't drive, there are several potential causes: * Ensure that the motor release levers are engaged. * Charge the batteries, making sure the charger setting is correct. * Unplug the charger from the wall outlet before attempting to operate the wheelchair. * Reset the circuit breaker. If it trips again, it may indicate an internal repair is needed, so contact your dealer or Invacare.
A
Angela WalshSep 14, 2025
Why does only one wheel turn on my Invacare Pronto M51 Wheelchair?
- M
  Mary SmithSep 14, 2025
  If only one drive wheel turns on your Invacare Wheelchair, it could be due to an electrical malfunction or one of the motor locks being disengaged. Contact your dealer for service or engage the motor lock.
F
flynnrobertSep 10, 2025
Why does my Invacare Pronto M51 slow down when Seat Function 1 is lit?
- K
  kristen64Sep 10, 2025
  If your Invacare Wheelchair slows or stops while driving and the Seat Function 1 indicator is lit, it is because the elevating seat is elevated. Return the seat to its lowest position.
B
Bradley AyalaSep 7, 2025
Why does my Invacare Wheelchair charger show low charge after charging?
- K
  Kenneth DixonSep 7, 2025
  If the charger indicator shows a low charge level immediately after charging your Invacare Wheelchair, it could be due to weak batteries, an electrical malfunction, or a charger malfunction. You may need to replace the batteries or the charger. You may need to contact your dealer or Invacare.
E
Erin CarlsonSep 4, 2025
Why does my Invacare Pronto M51 Wheelchair slow or stop while driving when the Seat Function 1 indicator is lit?
- M
  Michael HernandezSep 4, 2025
  If your Invacare Wheelchair slows or stops while driving and the Seat Function 1 indicator is lit, it is because the elevating seat is elevated. Return the seat to its lowest position.

Invacare Pronto M51 Specifications

General

Type	Power Wheelchair
Drive System	Rear-Wheel Drive
Frame Material	Steel
Wheel Type	Solid
Footrests	Swing-away
Brakes	Electromagnetic
Colors Available	Red, Blue, Silver
Weight Capacity	300 lbs
Seat Width	18 in
Overall Width	24 in
Maximum Speed	4 mph
Drive Wheel Size	10 in
Seat Height	19 inches (48 cm)
Motor	24V DC motors
Tires	Solid
Seat Depth	18 in
Battery	NF-22 (2 Required)