INVENTIA MT-301 - Configuration File Version; Configuration Identifier; Firmware Version; Last Configuration Date

19
7.2.1.3. Module serial number
Function - displays serial number configured telemetry module
Data type - text
Range - n/a, Read-only parameter
Comments - this field displays module serial number assigned during
manufacturing. This number is static and unique identifier
of the unit.
7.2.1.4. Firmware version
Function - displays the identification of actual version of internal
telemetry module program (firmware)
Data type - text
Range - n/a, read-only parameter
Comments - the value of this field changes automatically after download of
firmware
7.2.1.5. Configuration file version
Function - displays version identification of configuration file used for
actual configuration
Data type - text
Range - n/a, Read-only parameter
Comments - value depends on module's firmware version. Auxiliary
extension character defines the sub-version
7.2.1.6. Configuration identifier
Function - displays identification of current configuration
Data type - hexadecimal
Range - n/a, read-only parameter
Comments - the value of this parameter increases automatically by 1 after
each successfully stored configuration.
7.2.1.7. Last configuration date
Function - displays time and date of last successful configuration change
Data type - text
Range - n/a, read-only parameter
Comments - the value changes automatically with successful configuration
change. Useful in tracing unauthorized configuration changes.
7.2.1.8. Last reading time
Function - displays internal module time recorded during last configuration
reading or during last time setting
Data type - text