7
5
NETWORK CONFIGURATION
Cautions
• It is necessary to forget any other local / nearby
networks and make sure the Android or i OS device
is connected to the Wireless network you want to
configure.
• Make sure during the configuration to keep your
mobile data connection turned off
• Make sure the Android or i OS device Wireless function
works well and can be connected back to your original
Wireless network automatically.
Kind reminder:
User must finish all the steps in 8 minutes after powering
on AC, otherwise you need to power on it again.
■ Add New Device
1. Make sure your mobile device has already been
connected to the Wireless network which you
want to use. Also, you need to forget other local /
nearby Wireless networks in case it influences your
configuration process.
2. Disconnect the power supply of the dehumidifier for
5 minutes.
3. Connect the power supply of the dehumidifier and
press and hold the «FILTER» button for more than 3
seconds (the required button might be different, kindly
advise the User Manual of your unit).
4. When the dehumidifier displays “AP”, it means that
the dehumidifier wireless has already entered into “AP”
Mode.
To Next Page
Loading...
Need help?
General
