Need help?Do you have a question about the Invertek SS-45C and is the answer not in the manual?
General| Model | SS-45C |
|---|---|
| Motor Power | 45kW |
| Power Range | 45kW |
| Output Current | 90A |
| Protection Rating | IP20 |
| Input Voltage | 380-480V AC |
| Output Voltage | 0-480V AC |
| Control Method | V/F, Sensorless Vector |
| Communication Protocols | Modbus RTU |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Short Circuit |
| Cooling Method | Fan |
Details the function and connection of various terminals, including power, dip switches, and communication ports.
Outlines the sequential steps and critical safety precautions required for installing the SunStar controller.
Explains how to configure solar battery charging parameters using the 8-position DIP switch.
Details the DIP switch configurations for setting up the Load Control functions and algorithms.
Refers to the solar battery charging settings for diversion charge control DIP switch configuration.
Guides on wiring connections, wire sizing, and the power-up sequence for system initialization.
Lists and explains common fault messages displayed by the LCD, their causes, and how to resolve them.
Introduces PWM charging as an efficient method for solar battery charging and its benefits.
Explains the four stages of solar charging: Bulk, PWM Absorption, Equalization, and Float.
Details the 8 standard charging algorithms selectable via DIP switches for various battery types.
Explains the importance of routine equalization for battery performance and life, including benefits like cell balancing.
Covers user-selectable load control settings and Low Voltage Disconnect (LVD) parameters.
Emphasizes the critical importance of correctly sizing the diversion load to match the energy source.
To Next Page
