Invertek SS-60C - User Manual

Details the function and connection of each terminal on the controller, including power and communication ports.

Outlines the sequential steps for correctly installing the SunStar controller, including safety precautions.

Explains how to configure solar battery charging parameters using the 8-position DIP switches.

Details the DIP switch settings for configuring the Load Control mode, including LVD/LVR settings.

Describes the DIP switch configurations for the Diversion Charge Control mode.

Covers wire size recommendations and the procedure for connecting power and starting the controller.

Lists and explains common fault messages displayed by the LCD meter and their causes.

Explains the PWM charging method, its efficiency, and benefits for battery maintenance.

Summarizes the 8 standard battery charging algorithms available for different battery types.

Explains the importance and function of the BTS for temperature-compensated charging.

Details the benefits of equalization for battery health, including sulfation prevention and cell balancing.

Details selectable Load Control settings, including standard LVD and LVR parameters.

Summarizes the 8 standard diversion charging algorithms selectable via DIP switches.

Provides critical guidance on correctly sizing the diversion load to prevent battery overcharge or controller overload.

Provides basic troubleshooting steps for power-up issues, including checking breakers, fuses, and connections.

Addresses common solar charging problems like over/under-charging and temperature effects.

Covers issues related to no power to the load, including LVD, circuit breakers, and temperature.

Addresses problems in diversion control, such as load sizing, burnout, overcurrent, and temperature.