Page 32
BEARING TYPES: It is important that full designation is quoted to ensure that all special features are
incorporated.
Bearing Prefix
(All Types)
Grease Limiting
Speed (RPM)
BLz 03-1/2,-0.5/4,0.2/6, 0.3/6
BLz 05-2/2, -1/4, -2/4, 0.4/6, 0.6/6, 0.9/6, 1.3/6
BLz 24/25-8/2, -7.5/4, -4/6
BLz 24/25-10/2, -11/4, -8/6
BLz 24/25-13/2, -14/4, -11/6
BLz 40-30/2, -35/4, -27/6, -35/6, -15/8, -17/8
BLz 45-45/4, -42/6, -50/6, -24/8, -35/8
BLz 50-55/4, -60/6, -35/8, -45/8
BLz 50-75/6, -55/8, -57/8
BLz 60-90/6, -65/8, -70/8, -90/8
BLz 60/61-105/6, 61-125/6
DISPOSAL OF VIBRATORS
The vibrator must be disposed of in compliance with environmental legislation, and the various materials used
in its manufacture must be delivered to an authorised disposal/recycling centre.
The vibrator must only be taken out of service by operators trained in the observance of applicable laws on
health and safety at work.
Do not dump non-bio-degradable products, lubricants and non-ferrous materials (rubber, PVC, resins, etc) into
the environment. Dispose of all such materials as stipulated by current environmental protection laws.
Do not re-use parts or components that appear to be in good condition after they have been checked and/or
replaced by qualified personnel and declared unsuitable for use.
To Next Page
Loading...
Need help?
General
