Page 39
Grantham Engineering Ltd (Invicta Vibrators),
Harlaxton Road, Grantham, Lincolnshire, NG31 7SF, United Kingdom
Invicta Vibrators declare under our sole responsibility that the Invicta range of rotary out of
balance electric vibrators:
___ /__ - __/_/__/__/__
Serial Number: (six digit unique numerical unit identifier – refer to vibrator nameplate)
Comply to the following directive listed in the following declaration.
EC DECLARATION OF INCORPORATION
The Invicta range of rotary out of balance electric vibrators must not be put into service until the machinery into
which it is to be incorporated has been declared in conformity with the provisions of, THE SUPPLY OF
MACHINERY (SAFETY) REGULATIONS 2008 (SI 2008/1597).
The Invicta range of rotary electric vibrators are manufactured in accordance with THE SUPPLY OF
MACHINERY (SAFETY) REGULATIONS 2008 (SI 2008/1597) (transposed from Machine Directive
2006/42/EC) and identified as ‘partly completed machinery’.
The protection requirements of the Low Voltage Directive 2014/35/EU have been observed in accordance with
Annex I 1.5.1 of Machine Directive 2006/42/EC.
As per Annex II part B of 2006/42/EC, the following essential health and safety requirements have been
observed: 1.1.1, 1.1.2, 1.1.3, 1.1.5, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.4.1, 1.5.1, 1.5.2, 1.5.4, 1.5.5,
1.5.6, 1.5.7, 1.5.8, 1.6.1, 1.6.2, 1.6.4, 1.7.1, 1.7.2, 1.7.3, 1.7.4.
Huw Williams
Technical Director Grantham, July 2016
Manufacturer: Grantham Engineering Ltd (Invicta Vibrators), Harlaxton road, Grantham, Lincolnshire, NG31 7SF, United
Kingdom
Grantham Engineering Ltd agree to communicate by mail or e-mail the technical document compiled in accordance with
part B of Annex VII of directive 2006/42/EC upon a reasoned request by the national authorities.
The information contained in this booklet is issued as a guide and is not intended to be definitive. No legal
liability shall attach to Grantham Engineering Limited in connection with the use of this Guide.
Users of the machine are reminded that all work must comply with existing regulations imposed by statute or
by regulatory authorities, and it is the user's responsibility to ensure compliance with such Regulations.
P 2047, Issue N, 07/2016
Model type:
BLz, CLz
BLTz
FBLz
Frame Size :
03, 05, 15, 20, 22,
24, 25, 30, 40, 45,
50, 60, 75, 80
Force Output (kgs/100):
Range 22kgs to 23000kgs
Pole Speed (rpm):
2 = 2880 (50Hz) or 3456 (60Hz)
4 = 1440 (50Hz) or 1728 (60Hz)
6 = 960 (50Hz) or 1152 (60Hz)
8 = 720 (50Hz) or 864 (60Hz)
Winding group:
(see page 9)
Supply frequency
(Hz):
50
60
Alpha reference:
Alpha numeric ref. for
customer specific
requirements
To Previous Page
Loading...
Need help?
General
