involight DMX512- 192 - Running Chase and Blackscene; Running Chase Panel and Introduction

12
Running chase
1）
the schematic diagram of the running chase panel：
2)introduction of running the chase
①pess Chase to light the indicator light
②select the chase number you want: use Num Lock 1-12 to select the number
③adjusting the settling-time :adjust the clipper Speedto adjust the setting-time of the chase
steps .The top means the shortest time and the bottom the longest
④adjusting the shading-time :adjust the clipperCross to adjust the shading-time of the chase
step,and .The top means non-shading and the more declined the longer shading-time
⑤ running by sound-activated: if you need to activate chase in the way of
sound-activated ,pressMusic to make the lamp on,meaning having enterred the state of
sound-activated,and if the lamp is off ,it means the sound-activated state is exited
⑥Outputting blackscene:if you need to output balckscene ,press Blackout key so that you can
choose to whether output blackscene or not
⑦exiting the running chase: use NumLock 1-12 to select the running chase number and the
the chase will be closed。