7
(Edit the walking light procedure) Step Remove Programs / Remove Programs / decreasing
step-by-step selection procedure。
11) Step
key is called as B key，（Edit scenes) scene copy / preserve the scene; (Editor lights go
procedure) incremental step-by-step selection procedure。
12)
Scenekey is called as C key，（Scene Editor / walking lights Procedure) its reduced choice
key of scenes
13) Scene
key is called as D key，（Scene Editor / walking lights Procedure） its increced
choice key of scenes。
14) Digital display。
15) Speed Speed adjustment fader。
16) Cross Gradual adjustment fader。
17) Power Power switch。
The number keys (1-12) in the scene / procedures / manual
control mode of the corresponding menu
function of number keys
functional state
the number keys 1-12
Editing Scene Used to select the lamp
Scene Edit / Runk
Running scene Used to select the runing scenes
Editing program Used to select the editing scenes
Chase Edit / Run
Runing program Used to select the runing scenes
Manual
Manual control Used to select the lamp
Description of A,B,C,D these four function keys in the panel
①Step
When running scene with a digital display that's just - the first for a digital control
channel number CH fader shows that the first 2-4 fader-bit digital control input values to show。
② When the lights go running process with a digital display that's just - the first-bit digital tube
A,B,C,D Four key
scenes in the
editing function of
state
the function of A,B,C,D
Four buttons in the
editeditediting
process
To Next Page
Loading...
Need help?
General
