Detailed Function Description
63
Accumulated running time: Displays accumulated running time of inverter.
Notice: Above parameters are read only.
Function
Code
Name Description
Setting
Range
Factory Setting
P7.12 Third latest fault type 0~24
P7.13 Second latest fault type 0~24
P7.14 Latest fault type 0~24
These parameters record three recent fault types. For details, please refer to description
of chapter 7.
Function
Code
Name Description
Setting
Range
Factory
Setting
P7.15
Output
frequency at
current fault
Output frequency at current fault.
P7.16
Output current
at current fault
Output current at current fault.
P7.17
DC bus
voltage at
current fault
DC bus voltage at current fault.
P7.18
Input terminal
status at
current fault
This value records ON-OFF input
terminal status at current fault.
The meaning of each bit is as
below:
BIT3 BIT2 BIT1 BIT0
S4 S3 S2 S1
1 indicates corresponding input
terminal is ON, while 0 indicates
OFF. Notice: This value is
displayed as decimal.
To Next Page
Loading...
