Operational manual for dynamic braking unit
-1-
1 Safety Precautions
1.1 Safety definition
Serious physical injury or even death may occur if not follow
relevant requirements
Physical injury or damage to the devices may occur if not
follow relevant requirements
Physical hurt may occur if not follow relevant requirements
People working on the device should take part in professional
electrical and safety training, receive the certification and be
familiar with all steps and requirements of installing,
commissioning, operating and maintaining the device to avoid
any emergency.
1.2 Warning symbols
Warnings caution you about conditions which can result in serious injury or death and/or
damage to the equipment, and advice on how to avoid the danger. Following warning symbols
are used in this manual:
Serious physical injury or even
death may occur if not follow the
relative requirements
Physical injury or damage to the
devices may occur if not follow the
relative requirements
Physical hurt may occur if not
follow the relative requirements
1.3 Safety guidelines
Only qualified electricians are allowed to operate.
Do not carry out any wiring and inspection or changing components
when the power supply is applied.
Do not refit unauthorizedly; otherwise fire, electric shock or other injury
may occur.
1.3.1 Delivery and installation
Please install the braking units and braking resistors on fire-retardant
material and keep them away from combustible materials.
To Next Page
Loading...
Need help?
General
