Goodrive20-EU series VFD Product overview
8
Contact capacity: 3A/AC250V
*Relay 2 output only available on GD20-EU > 2.2kW
Standard embedded DC reactor for the VFDs
(≥18.5kW)
Wall and rail installation of the VFDs (single phase
230V/three phase 400V, ≤2.2KW and three phase
230V, ≤0.75KW)
Wall and flange installation of the VFDs (three
phase 400V, ≥4KW and three phase 230V, ≥1.5KW)
Standard for the VFDs≤37kW and optional for the
VFDs within 45 – 110kW
3PH 400V 4kW and above/3PH 230V 1.5kW and
above can comply with IEC61800-3 class C3,
others can meet requirements of IEC61800-3 class
C3 by installing external filter (optional). This series
of products can comply with IEC61800-3 class C2
by installing external filter (optional).
-10 to 50°C , derate 1% for every increased 1°C
when the temperature is higher than 40°C
Below 1000m. If the elevation is above 1000m,
derate 1% for every additional 100m.
Ingress protection (IP)
rating
IP20
Note: The VFD with plastic casing should be
installed in metal distribution cabinet which
conforms to IP20 and the top of which conforms to
IP3X.
Comply with CE requirements
To Next Page
Loading...
Need help?
General