INVT GD300-018G-4

Goodrive300 Series VFD Basic operation instruction
127
Besides P00.01 and P00.02, terminal command setting can also used to set the running command
channel.
Current running
command
channel
P00.01
Multi-function
terminal 36
Switch to keypad
Multi-function
terminal 37
Switch to terminal
Multi-function
terminal 38
Switch to
communication
Keypad
/
Terminal
Communication
Terminal
Keypad
/
Communication
Communication
Keypad
Terminal
/
Note: "/" means the multi-function terminal is invalid on the current given channel.
Related parameters:
Function
code
Name
Detailed instruction of parameters
Default
value
P00.00
Speed control mode
0: Sensorless vector control mode 0
(apply to AM and SM)
1: Sensorless vector control mode 1
(applying to AM)
2: SVPWM control
1
P00.01
Running command
channel
0: Keypad
1:Terminal ("LOCAL/REMOT" flickering)
2:Communication ("LOCAL/REMOT" on)
0
P00.02
Communication running
commands
0: Modbus communication channel
1: PROFIBUS\CANopen communication
channel
2: Ethernet communication channel
3: Reserved
0
P00.18
Function
restore parameter
0: No operation
1: Restore the default value
2: Cancel the fault record
0
P00.15
Motor parameter
autotuning
0: No operation
1: Rotating autotuning
2: Static autotuning 1 (autotune totally)
3: Static autotuning 2 (autotune part
parameters)
0
P02.00
Motor type 1
0: Asynchronous motor
1: Synchronous motor
0
P02.01
Rated power of
asynchronous motor 1
0.1–3000.0kW
Depend
on model