Need help?Do you have a question about the INVT GD350-2R2G-4 and is the answer not in the manual?
Defines key safety terms like Danger, Warning, and Note.
Explains the meaning of various warning symbols used in the manual.
Provides essential safety rules for installation, operation, and maintenance.
Checks the inverter's installation condition after it's mounted.
Describes the procedures for initial setup and commissioning of the inverter.
Lists the rated values for input/output power, current, and frequency.
Covers installation environment, direction, mode, and spacing requirements.
Provides wiring diagrams for the main power circuit of different voltage and power ranges.
Details the wiring diagrams for the basic control circuit connections.
Explains how to protect the inverter and motor cables from short circuits and overloads.
Covers keypad components, display states, and operational procedures.
Outlines the standard procedures for commissioning the inverter.
Details various control modes like Vector, SVPWM, Torque, PID, and start/stop functions.
Guides on commissioning for position control and spindle positioning functions.
Provides information on diagnosing and handling inverter faults.
Categorizes and details function parameters, including default values and modification attributes.
Explains how alarms and faults are indicated on the keypad and indicators.
Describes methods for resetting inverter faults using the keypad or digital inputs.
Provides a detailed list of fault codes, their possible causes, and corrective measures.
Details routine maintenance checks for the ambient environment, voltage, keypad, and main circuit.
Lists common communication faults and their possible causes and solutions.
To Next Page
General