Need help?Do you have a question about the INVT GD300-037G-4 and is the answer not in the manual?
General| Model | GD300-037G-4 |
|---|---|
| Power | 37kW |
| Output Current | 75A |
| Protection Level | IP20 |
| Cooling Method | Forced air cooling |
| Input Voltage | 3-phase 380V |
| Control Mode | V/F control, vector control |
| Control Method | V/F control |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, overheat, short circuit |
| Communication Interface | Modbus |
| Ambient Temperature | -10°C to +40°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | 5%~95% RH, non-condensing |
| Altitude | Below 1000m (Derating above 1000m) |
Defines hazard levels like Danger, Warning, and Note for safety instructions.
Provides essential guidelines for safe operation and handling of the VFD.
Outlines essential steps for initial setup and operation of the VFD.
Lists technical details and specifications of the VFD.
Details the electrical and performance ratings for different VFD models.
Covers environmental requirements and physical installation aspects.
Provides diagrams and instructions for connecting main circuit and control circuits.
Details how to navigate menus and modify parameters using the keypad.
Lists and explains all function codes and their parameters for the VFD.
Step-by-step guide for initial power-up and basic checks.
Explains the principles and application of vector control for motor operation.
Instructions on how to reset VFD faults using keypad or digital input.
Provides troubleshooting steps for identifying and resolving VFD faults.
Illustrates Modbus RTU command structures for reading and writing VFD data.
Details derating conditions for ambient temperature, altitude, and carrier frequency.
To Next Page