Need help?Do you have a question about the INVT GD300-075G-4 and is the answer not in the manual?
General| Model | GD300-075G-4 |
|---|---|
| Output Power | 75 kW |
| Output Current | 150 A |
| Frequency Range | 0-400 Hz |
| Control Mode | V/f Control, Vector Control |
| Cooling Method | Forced air cooling |
| Protection Level | IP20 |
| Communication Interface | RS485 |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C ~ +60°C |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 1000 m |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, overheating, short circuit |
Provides essential safety guidelines for VFD operation and maintenance, including warnings and precautions.
Outlines the fundamental steps for commissioning the VFD after installation for initial operation.
Details the technical specifications of the VFD, including input/output, control features, and interfaces.
Provides detailed technical data and specifications for various VFD models and voltage ranges.
Covers VFD mechanical installation, including environment, direction, and mounting modes.
Details the main circuit and control circuit wiring diagrams and terminal connections for VFDs.
Lists and describes all function parameters available in the Goodrive300 series VFDs.
Guides users through the initial power-up procedure for the VFD after installation.
Guides users on how to identify and resolve VFD faults using fault codes and parameters.
Provides flowcharts for diagnosing common VFD faults like motor not working or overcurrent.
Explains Modbus RTU command codes and data formats for VFD control and monitoring.
To Next Page