Need help?Do you have a question about the INVT GD350-011G-4 and is the answer not in the manual?
General| Model | GD350-011G-4 |
|---|---|
| Rated Power | 11kW |
| Cooling Method | Forced air cooling |
| Protection Level | IP20 |
| Output Voltage | 0 ~ Input Voltage |
| Control Mode | Sensorless Vector Control (SVC), V/F control |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overload, Overtemperature, Short circuit |
| Communication Interface | Modbus RTU |
| Ambient Temperature | -10°C to +40°C |
| Storage Temperature | -20°C ~ +60°C |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Below 1000m |
General safety guidelines for operating, installing, and maintaining the inverter.
Procedures for initial setup and basic operation of the inverter before full commissioning.
Guidelines for physical installation, including environment, direction, and mounting modes.
Illustrates standard wiring diagrams for the main power circuit of the inverter.
Shows wiring diagrams for control circuits and input/output signal connections.
Measures for protecting the inverter, motor, and cables from electrical hazards.
Detailed procedures for operating the inverter using the keypad menus.
Instructions for common inverter operations like commissioning, control modes, and parameters.
Comprehensive listing of all function codes, names, descriptions, default values, and modification attributes.
Methods for resetting the inverter after a fault has occurred.
Guides users through processing faults, checking parameters, and applying corrective measures.
Troubleshooting flowcharts for common issues like motor failure, vibration, and overcurrent.
Solutions for reducing interference on meter switches, sensors, communication, and RCDs.
Routine maintenance checks for the inverter's environment, voltage, keypad, and main circuit.
Formats and examples of Modbus RTU commands for reading and writing inverter data.
Lists common communication faults and their potential causes and solutions.
Details the terminals, indicators, and functions of the IO extension card (EC-IO501-00).
Describes terminals, indicators, and functions for PG extension cards (incremental and resolver).
Details functionality, indicators, and wiring for Bluetooth, CANopen, Ethernet, and PROFIBUS cards.
Functionality, development environment, and features of the programmable extension card (EC-PC501-00).
Guidelines for selecting and installing brake components like resistors and units.
Describes input states and corresponding faults for the Safe Torque Off (STO) function.
Checklist to ensure proper installation and functionality of the STO feature before use.
To Next Page