Need help?Do you have a question about the INVT GD350-7R5G-4 and is the answer not in the manual?
Guidelines for safe installation, operation, and maintenance of the inverter, including warnings and precautions.
Verification steps for the inverter's installation condition and compliance with operational requirements.
Procedures for initial setup, motor parameter configuration, and basic operation of the inverter.
Detailed technical specifications for power input/output, control performance, and peripherals.
Guidelines for the physical installation of the inverter, including environmental and mounting requirements.
Detailed requirements for installation site, ambient temperature, humidity, altitude, and other environmental factors.
Description of different installation methods such as wall-mounting, flange-mounting, and floor-mounting.
Wiring diagrams and instructions for connecting the main power circuit of the inverter.
Wiring diagrams and instructions for connecting the control circuit and I/O terminals.
Measures for protecting the inverter and motor cables from short circuits and overloads.
Instructions on navigating menus, selecting parameters, and modifying settings using the keypad.
Comprehensive list of all function codes, names, detailed descriptions, default values, and modification attributes.
How alarms and faults are indicated on the inverter's keypad and indicators.
Methods for resetting inverter faults via keypad, digital inputs, or power cycling.
Detailed table of fault codes, possible causes, and corrective measures for troubleshooting.
How Goodrive350 series inverters use Modbus RTU mode and RS485 interfaces for communication.
Table detailing STO input states and their corresponding fault codes.
Checklist to ensure proper installation and usage of the STO function.
To Next Page
General