Need help?Do you have a question about the INVT GD300-5R5G-4 and is the answer not in the manual?
General| Model | GD300-5R5G-4 |
|---|---|
| Category | DC Drives |
| Power | 5.5kW |
| Cooling Method | Forced air cooling |
| Enclosure Rating | IP20 |
| Rated Power | 5.5 kW |
| Control Method | V/F control |
| Communication Interface | Modbus-RTU |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, short circuit, overheating |
| Operating Temperature | -10°C to +40°C |
| Storage Temperature | -20°C to +60°C |
| Relative Humidity | ≤95% RH (non-condensing) |
| Altitude | ≤1000m above sea level |
| Overload Capacity | 150% for 60 seconds |
Provides essential safety guidelines for operating, installing, and maintaining the VFD.
Steps to perform initial setup and basic configuration for VFD operation.
Covers physical mounting, environmental conditions, and installation directions.
Provides detailed diagrams and instructions for main and control circuit wiring.
Details how to navigate menus, modify function codes, and set parameters via the keypad.
Comprehensive list and explanation of all VFD function codes and parameters.
Selects the motor control mode: Sensorless Vector or SVPWM.
Step-by-step guide for initial power-up and VFD initialization.
Explains the principles and application of vector control for precise motor performance.
Describes torque control mode, focusing on stable torque output and frequency limits.
Guides on setting motor parameters for optimal VFD performance and autotuning.
Details the three starting methods and their logic for VFD operation.
Explains various methods for setting the VFD's output frequency.
Explains the programmable functions of digital input terminals.
Explains PID control principles and parameter setting for process control.
Provides information on identifying, diagnosing, and resolving VFD faults.
Guides users on how to troubleshoot VFD faults after they occur.
Detailed table of common VFD faults, their causes, and suggested solutions.
Flowcharts and descriptions for diagnosing common VFD and motor issues.
Illustrates Modbus RTU command codes, data formats, and examples.
Details the PROFIBUS extension card, its features, and naming rules.
Describes the EC-TX-103 communication card, its appearance, and connection.
Explains PROFIBUS-DP protocol, data structures, and control/state words.
Explains factors like temperature, altitude, and frequency affecting VFD performance.
To Next Page