Need help?Do you have a question about the INVT GD300-2R2G-4 and is the answer not in the manual?
General| Model | GD300-2R2G-4 |
|---|---|
| Output Power | 2.2kW |
| Output Current | 5.5A |
| Frequency Range | 0-400Hz |
| Control Method | V/F control, Sensorless Vector Control (SVC), Torque control |
| Storage Temperature | -20°C to +60°C |
| Protection Level | IP20 |
| Phase | 3-phase |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overload, Overtemperature, Phase Loss, Short Circuit |
| Communication Interface | RS485, Modbus RTU |
| Ambient Temperature | -10°C to +50°C |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | 0-1000m |
Provides essential guidelines for safe VFD handling, installation, operation, and maintenance.
Step-by-step guide for initial VFD setup, parameter configuration, and basic operational testing.
Covers VFD orientation, mounting, and detailed main and control circuit wiring.
Explains how to navigate menus, change parameters, and set up password protection.
Detailed descriptions of all configurable parameters, organized by functional groups.
Procedure for initial VFD power-up, motor parameter configuration, and autotuning.
Guides on identifying, rectifying, and resetting VFD faults and common issues.
Provides guidance on identifying, rectifying, and resetting VFD faults and common issues.
Specifies VFD capacity ratings and derating factors for temperature, altitude, and frequency.
To Next Page