Need help?Do you have a question about the INVT Goodrive GD35-7R5G-4-H1 and is the answer not in the manual?
General| Model | GD35-7R5G-4-H1 |
|---|---|
| Category | Controller |
| Rated Power | 7.5 kW |
| Output Current | 15A |
| Cooling Method | Forced air cooling |
| Storage Temperature | -20°C to +60°C |
| Enclosure Rating | IP20 |
| Output Voltage | 0-Input Voltage |
| Frequency Range | 0 Hz - 400 Hz |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overload, Short circuit |
| Communication Interface | RS485 |
| Ambient Temperature | -10°C to +50°C |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Below 1000m |
| Control Mode | V/F control, Sensorless vector control, Torque control |
Outlines essential safety rules for VFD operation, including wiring, grounding, and handling.
Guides through initial VFD setup, including motor type selection, autotuning, and parameter configuration.
Covers environmental conditions, installation direction, and mounting methods for VFDs.
Details main circuit and control circuit wiring, terminal connections, and protection measures.
Explains wiring diagrams and terminal functions for various control signals and interfaces.
Guides on navigating menus, modifying function codes, setting passwords, and watching VFD states.
Lists and details all function parameters organized by group, explaining purpose, defaults, and modification rules.
Explains principles and applications of Vector, SVPWM, and Torque control modes for motor operation.
Explains fault indications, reset methods, and how to view recent fault history.
Lists common VFD faults with causes and provides detailed solutions for troubleshooting.
Presents diagnostic flowcharts for common issues like motor problems, overvoltage, and overcurrent.
Guides on selecting and installing brake units and resistors for VFDs to manage regenerative energy.
To Next Page
