INVT IVC1L Series - User Manual

To Next Page

资料版本：V1.0 归档日期：2014-09-06

IVC1L Series PLC Quick Start

User Manual

This quick start manual is to offer you a quick guide to the design,

installation, connection and maintenance of IVC1L series PLC,

convenient for on-site reference. Briefly introduced in this booklet are the

hardware specs, features, and usage of IVC1L series PLC, plus the

optional parts and FAQ for your reference. For ordering the above user

manuals, contact your Invt distributor or sales office.

1 Introduction

1.1 Model Designation

The model designation is shown in the following figure.

IVC 1L

16 14 M A

Power input mode (A: 220ac input; D:

24Vdc input); N: no external power

input.

Output m ode. R: relay output; T:

transistor output; N: no output

Module type.

M: Basic module. E: Extension module

Output points. In this example, 14.

Input points. I n this example, 16.

Version number.

Series number. 1: m ini; 2: small;

3: mid; 4: large.

INVT Controller module

R 1

Special function. 1: Anolog

To Customers:

Thank you for choosing our products. To improve the product and provide

better service for you, could you please fill in the form after the product has

been operated for 1 month, and mail or fax it to our Customer Service Center?

We will send you an exquisite souvenir upon receiving the complete Product

Quality Feedback Form. Furthermore, if you can give us some advices on

improving the product and service quality, you will be awarded a special gift.

Thank you very much!

Invt Control Technology Co., Ltd.

Product Quality Feedback Form

Customer name

Tele

Address

Zip code

Model

Date of use

Machine SN

Appearance or

structure

Performance

Package

Material

Quality problem

during usage

Suggestion about

improvement

Address: Gaofa Industrial Park, Longjing, Nanshan District, 518055, Shenzhen,

PRC. Tel: +86 755

1.2 Outline

The outline of the basic module is shown in the following figure by taking

the example of IVC1L-1614MAR.

Input StatusLEDsInput teminals

Port0

Power supplyteminals

Mode selection switch

System status LEDs

Port1

Port2

Extension port

Output status indicators

Output teminals

PORT0 and PORT1、PORT2 are communication terminals. PORT0 uses

RS232 mode with Mini DIN8 socket. PORT1 and PORT2 Have Double

RS485. The busbar socket is for connecting the extension module. The

mode selection switch has three positions: ON, TM and OFF.

1.3 Terminal Introduction

The layouts of terminals of different I/O points are shown below:

1．14-point、16-point、24-point

Input terminal:

Output terminal:

2．30-point

Input terminal:

Output terminal:

3．40-point

Input terminal:

Output terminal:

4．60-point

Input terminal:

Output terminal:

5．30-point with anolog

Input terminal:

S/S

X0 X2

X6 X10 X12 X14

X1 X3

X5 X7

X11 X13 X15

X16

X17

AV1+ AI1+

AVI1-

AV2+ AI2+

AVI2-

Output terminal:

Y0 Y1 Y2

COM0 COM1

COM2

Y10

Y11

Y12

Y13

Y14

Y15

AVO+ AIO+

AO-

COM

+24

COM3

Need help?

Do you have a question about the INVT IVC1L Series and is the answer not in the manual?

INVT IVC1L Series Specifications

General

Series	IVC1L
Category	Controller
Storage Temperature	-20°C to +60°C
Altitude	Below 1000m (Derating required above 1000m)
Input Voltage	220V AC
Control Mode	V/F control
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short circuit
Communication Interface	RS485
Humidity	5% to 95% (non-condensing)