Need help?Do you have a question about the INVT SV-DA200-0R7-2 and is the answer not in the manual?
General| Model | SV-DA200-0R7-2 |
|---|---|
| Output Current | 0.7A |
| Cooling Method | Fan cooling |
| Altitude | Below 1000m |
| Communication Protocol/Interface | RS485 |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat |
| Ambient Temperature | -10~40℃ |
| Storage Temperature | -20°C to +60°C |
| Humidity | 5% to 95% (non-condensing) |
| Type | AC Drive/VFD |
| Control Method | V/F control |
Lists essential safety instructions for installation, operation, and maintenance.
Explains installation methods, space, and direction requirements.
Covers input power, control cables, cable diameters, and EMI filter requirements.
Provides wiring diagrams for main circuits across different voltage and power ranges.
Covers initial power-on, trial jogging, mode operation, enabling, and stopping.
Covers configuration and functions of digital and analog I/O.
Covers parameters for JOG, homing, and point-to-point control.
Explains control words and position settings for PTP operations.
Instructions for online and offline inertia identification procedures.
Details automatic and manual adjustment methods for servo loops.
Lists all fault codes, their causes, and recommended countermeasures.
Details fault codes and countermeasures specific to CANopen communication.
Lists fault codes and countermeasures for PROFIBUS-DP communication.
Provides fault codes and countermeasures for EtherCAT communication.
Summarizes fault codes, history, clearability, and disable status.
To Next Page