Need help?Do you have a question about the INVT Goodrive GD35-5R5G-4-H1 and is the answer not in the manual?
General| Model | GD35-5R5G-4-H1 |
|---|---|
| Category | Controller |
| Rated Power | 5.5 kW |
| Rated Current | 12 A |
| Frequency Range | 0-400 Hz |
| Protection Level | IP20 |
| Cooling Method | Forced air cooling |
| Control Mode | V/f Control, Vector Control |
| Communication Interface | RS485 |
Provides essential safety rules for VFD operation, installation, and maintenance.
Essential steps for initial VFD setup and basic functional testing.
Guidelines for physically mounting the VFD, considering environmental factors.
Detailed wiring diagrams and instructions for main and control circuits.
Methods and guidelines for protecting VFD wiring against short circuits and overloads.
Description of the VFD's keypad, its buttons, and display functions.
Comprehensive list and explanation of all available VFD function parameters.
Essential checks and procedures for initial VFD power-up and startup.
Explanation of vector control principles and its application for motor control.
How to configure and use the VFD's torque control capabilities.
Critical motor parameters that need to be set for optimal VFD performance.
Methods for setting the VFD's output frequency using various input channels.
Procedures for resetting VFD faults using keypad, digital input, or power cycling.
General steps for troubleshooting and resolving VFD faults.
Diagnostic flowcharts for common VFD operational issues.
Introduction to the Modbus protocol used for VFD communication.
Explanation of RTU communication frame formats and data structures.
Common issues and troubleshooting steps for communication failures.
Details on PROFIBUS-DP communication, data structures, and protocols.
To Next Page