Need help?Do you have a question about the INVT SPC7K5TR40 and is the answer not in the manual?
General| Model | SPC7K5TR40 |
|---|---|
| Rated Output Power | 7.5 kW |
| Efficiency | ≥98% |
| Cooling Method | Forced air cooling |
| Protection Level | IP20 |
| Communication Interface | RS485 |
| Type | Solar Pumping Inverter |
| Output Voltage | 3-phase 380V |
| Output Frequency | 50/60 Hz |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20~+70℃ |
| Humidity | 5-95% (non-condensing) |
| Altitude | up to 2000 m |
Defines hazard levels (Danger, Warning, Note) and explains warning symbols used in the manual.
Covers safety procedures during product delivery, installation, and initial commissioning.
Covers orientation, mounting techniques, and electrical wiring of the inverter.
Steps for ensuring safe operation before powering on and performing a trial run.
Provides a table of common fault codes, their causes, and solutions.
Continues fault diagnosis with more specific error codes and their remedies.
To Next Page