EasyManua.ls Logo

iodd ST Series - AES256 Encryption Administration; Notes on Encryption; Admin Password Management

iodd ST Series
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
● If the administrator's password is changed, all user accounts will be deleted.
● When an administrator sets or deletes an administrator's password,
all data on the disk is initialized and all user accounts are deleted.
1. Press the Menu button to select the [Encryption] [Admin] menu.
1.1 When setting the first password, select the [Set 2nd P.W.] menu and set the 2nd P.W
2. Select the [SetEncyrption] menu. Check the notification that all data inside will be deleted.
3. Enter the administrator password twice (4 - 38 digits)
3.1 The administrator sets the first digit of the password to zero.
4. Wait for a while to finish setting up admin encryption.
5. When IODD is reconnected, the 0+administrator password set in step 3 is requested.
ex) 0 55447788
1. Press the Menu button to select the [Encryption] [Admin] menu.
2. Select the [Remove Encryption ] menu. Check the notification that all data inside will be deleted.
3. Enter the administrator password once (4 - 38자리 숫자)
4.
Wait for a while to finish Remove admin encryption.
Admin | Set admin Password
Admin | Remove Admin Password
1. Press the Menu button to select the [Encryption] [Admin] menu.
2. Select the [Chg Password] menu. Check the notification [All user passwords Will be deleted]
If the Admin password is changed, all user passwords are deleted, and a new user
password must be set in Admin mode.
3.
Enter the Old administrator password once (4 - 38 digits)
4.
Enter the New administrator password Twice (4 - 38digits)
Admin | Change Admin Password
AES256 Encryption(Admin)
user identification number(Admin 0/Users 1-4)
Password (Max 37 Digits)
XX4XX
XX1XX
When setting/deleting the administrator password,
all data on the IODD drive is initialized.
Even if you forgot the administrator password, you can initialize the installed
drive and use it. Initialize the disk initialization method as MBR->GPT->MBR.
Please note that all existing data will be deleted.
If the 2nd password is lost, the encrypted drive cannot be used for
another IODD. It is impossible to access, so be careful not to lose it.
Notes on Encryption

Related product manuals