IOGear GCS1808 User Manual

Firmware Upgrade
This function allows you to have the KVM activates
the rmware upgrade mode so that you can
perform a rmware upgrade to the KVM. If you
would like to do a rmware upgrade, connect the
rmware cable between the computer and KVM,
then type Y to proceed with the rmware upgrade;
otherwise, type N to cancel.
After you type Y, you will see the below screen.
The KVM is now in rmware upgrade mode.
Please see Firmware Upgrade section for details
about how to perform a rmware upgrade.
44
45

IOGear GCS1808 Specifications

General

I/O ports	SPHD-18
Ports quantity	8
Connectivity technology	Wired
Compatible operating systems	- Windows XP, Windows Vista (32-bit / 64-bit ) - Windows 7 - Apple Mac OS 9.0+ - Sun Solaris 8.0+ - Linux
Maximum resolution	2048 x 1536 pixels
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C